高工作电压小交流电实验设计检测仪（耐脉冲实验设计检测仪）-（计算的机掌握）

High voltage low current tester (arc resistance tester) - (computer control)

企业产产品名稱：耐电弧试验机

Product name: electric arc resistance tester

成品应用：NDH-A

Product model: NDH - A

符合规格：GB/T 1411-2002《粉末状隔绝物料耐高降低交流电电弧焊接尖端放电的试验台》（等一起IEC  61621-1997）及ASTM D495等规格的的要求设计的概念制造出的，并贴合IEC 149、UL 746A等试验装置的方法

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

包括应用范围之内及功能性：

本耐压机是通过应用软件于减速机、电商和家居电商等该行业的电工作业用朔胶、树酯胶和电耐压漆等电耐压涂料的耐弧光性评选，主使用于物质电耐压涂料如：朔胶、透气膜、树酯、黑云母、陶瓷制品、玻璃钢、电耐压油、电耐压漆、瓦楞纸等材质的耐弧光性测评；

本實驗机由计算出来机管控执行，能体现 到现阶段實驗状态下及實驗时候，實驗结束后后并维持到现阶段實驗数据显示，并可彩打.标准的实验上报上报。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 超声波焊接机为左右两内置式空间结构，底端为方法设备，上半部为检验箱。

2 本货品用到*新智能化把控好系统，可以通过的选择源程序（IEC或ASTM）可主动展开耐压，并在台式机上显现实验时候和最终。

3 **能更好，抗干涉程度强，测试测试gps精更高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 焊弧通断日子差值：低于 ±10ms

2 调压器出水量：2kVA

3 额定容量实验设计输出功率：12.5kV

4 经过多次实验发现输出功率表面粗糙度：±3%

5 电流值调控gps精度：±10%  工作电流在线测量精准度：1.5%

6 电极片对坯料学习压力：（0.5±0.05）N

7 电极片材质：钨棒

8 工业距里：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 实用场景的温度：（23±2）℃

10 选择场景气温：（50±5）%

11 电源适配器：220V±5%  50Hz  10A

12 校正    步骤：   执行标准/美标/10 mA 累计/20 mA 连着/30 mA陆续/40 mA连续性

13 耐压试验编译程序内容如下：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 物品款式：

NDH-A    耐弧光试验检测仪-微机保持

NDH-B    耐电弧焊接实验设计仪-手触屏设定

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！